After adding 'extension = phalcon.so' to the php.ini file, the apache server does not start again.

After adding 'extension=phalcon.so' to my php.ini file, I get such an error when restarting my Apache server.

"Job for apache2.service failed because the control process exited with error code. See "systemctl status apache2.service" and "journalctl -xe" for details."

image

Thank you for your help!



6.0k

Could you copy the result of "systemctl status apache2.service" and "journalctl -xe" ?

edited Jan '19

systemctl status apache2.service:

  apache2.service - LSB: Apache2 web server
   Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
  Drop-In: /lib/systemd/system/apache2.service.d
           └─apache2-systemd.conf
   Active: failed (Result: exit-code) since Sal 2019-01-15 09:14:56 +03; 1min 25
     Docs: man:systemd-sysv-generator(8)
  Process: 11620 ExecStop=/etc/init.d/apache2 stop (code=exited, status=0/SUCCES
  Process: 3983 ExecReload=/etc/init.d/apache2 reload (code=exited, status=0/SUC
  Process: 17750 ExecStart=/etc/init.d/apache2 start (code=exited, status=1/FAIL

Oca 15 09:14:36 Lucy systemd[1]: Starting LSB: Apache2 web server...
Oca 15 09:14:36 Lucy apache2[17750]:  * Starting Apache httpd web server apache2
Oca 15 09:14:36 Lucy apache2[17750]: AH00558: apache2: Could not reliably determ
Oca 15 09:14:56 Lucy apache2[17750]:  *
Oca 15 09:14:56 Lucy apache2[17750]:  * The apache2 instance did not start withi
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Control process exited, code=e
Oca 15 09:14:56 Lucy systemd[1]: Failed to start LSB: Apache2 web server.
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Unit entered failed state.
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Failed with result 'exit-code'
lines 1-19/19 (END)...skipping...
● apache2.service - LSB: Apache2 web server
   Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
  Drop-In: /lib/systemd/system/apache2.service.d
           └─apache2-systemd.conf
   Active: failed (Result: exit-code) since Sal 2019-01-15 09:14:56 +03; 1min 25s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 11620 ExecStop=/etc/init.d/apache2 stop (code=exited, status=0/SUCCESS)
  Process: 3983 ExecReload=/etc/init.d/apache2 reload (code=exited, status=0/SUCCESS)
  Process: 17750 ExecStart=/etc/init.d/apache2 start (code=exited, status=1/FAILURE)

Oca 15 09:14:36 Lucy systemd[1]: Starting LSB: Apache2 web server...
Oca 15 09:14:36 Lucy apache2[17750]:  * Starting Apache httpd web server apache2
Oca 15 09:14:36 Lucy apache2[17750]: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
Oca 15 09:14:56 Lucy apache2[17750]:  *
Oca 15 09:14:56 Lucy apache2[17750]:  * The apache2 instance did not start within 20 seconds. Please read the log files to discover problems
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Control process exited, code=exited status=1
Oca 15 09:14:56 Lucy systemd[1]: Failed to start LSB: Apache2 web server.
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Unit entered failed state.
Oca 15 09:14:56 Lucy systemd[1]: apache2.service: Failed with result 'exit-code'.

journalctl -xe

Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
Oca 15 09:17:46 Lucy kernel: pcieport 0000:00:1c.5: can't find device of ID00e5
edited Jan '19

What about this?

journalctl -u php-7.2-fpm.service -xe

(substitute your installed PHP version)

What about this?

journalctl -u php-7.2-fpm.service -xe

(substitute your installed PHP version)

This command gave an output as follows: "-- No entries --"

What version of PHP do you think I should use? I'm using PHP 7.0 now.



6.0k
edited Jan '19

Can you try to remove phalcon.so from the ini and try to start apache (and php-fpm if you're not using the apache module). I'm not sure if this is phalcon related.

Can you try to remove phalcon.so from the ini and try to start apache (and php-fpm if you're not using the apache module). I'm not sure if this is phalcon related.

I've tried. The apache server is running when I delete Phalcon.so

Made a typo, so then for you it should be:

journalctl -u php7.0-fpm.service

What about this?

journalctl -u php-7.2-fpm.service -xe

(substitute your installed PHP version)

This command gave an output as follows: "-- No entries --"

What version of PHP do you think I should use? I'm using PHP 7.0 now.

Made a typo, so then for you it should be:

journalctl -u php7.0-fpm.service

What about this?

journalctl -u php-7.2-fpm.service -xe

(substitute your installed PHP version)

This command gave an output as follows: "-- No entries --"

What version of PHP do you think I should use? I'm using PHP 7.0 now.

Unfortunately I got the same result. Please help. I'm going crazy now.

edited Jan '19

I solved my problem. Delete your own settings and this settings steps follow

https://docs.phalconphp.com/en/3.4/installation#installation-linux-debian-phalcon-php7